How to Recharge a Breeze Pro: A Comprehensive Guide

Are you looking for a comprehensive guide on how to recharge a breeze pro? Look no further! At Bonbebe.vn, we’ve got you covered. In this article, we will walk you through the step-by-step process of recharging your Breeze Pro device, ensuring that you can enjoy its full potential. Whether you’re a beginner or an experienced user, our guide will provide you with all the necessary instructions and precautions to safely recharge your Breeze Pro. So, let’s dive in and discover how to keep your Breeze Pro powered up and ready for use!

Safely Opening the Breeze Pro

Tools Needed:

• Pliers

Step 1: Removing the Bottom Cap

Using a pair of pliers, carefully grip the bottom cap of the Breeze Pro device. Apply gentle pressure and twist counterclockwise to unscrew and remove the cap. Take caution to avoid piercing the batteries or cutting any wires during this process.

Note:

If a knife or screwdriver is used instead, there is a higher risk of damaging the device or causing injury. Pliers are recommended for a safer approach.

Step 2: Sliding the Battery

To access the battery, tap the Breeze Pro on a table or solid surface. This will help slide the battery out or make it flush with the housing. Do not pull on the wires at this stage.

Note:

Be cautious while tapping the device to avoid any damage to the battery or internal components.

Step 3: Removing the Air Sensor and Light Housing

Take off the silicone housing that covers the air sensor and light. Make a small, careful cut in the silicone and remove the sensor by pulling it away from the glue. Don’t worry, it will easily fit back together later.

Preparing the Wires and Battery

1. Gathering the Necessary Materials

Before you start preparing the wires and battery for recharging your Breeze Pro, make sure you have the following materials:

• A toothbrush or small tool for prying open the device
• A phone charger or broken Apple/Android cable
• Scissors or wire cutters
• Electrical tape

2. Removing the Bottom Cap and Silicone Housing

To access the wires and battery, you need to remove the bottom cap of the Breeze Pro device. Use pliers to carefully pry off the cap, ensuring no damage to the device. Additionally, remove the silicone housing for the air sensor and light by making a small cut and gently pulling it away.

2.1 Cutting Away Orange Electrical Tape

After removing the silicone housing, locate the red port on the end of the battery. Use caution while cutting away a small amount of the orange electrical tape from the red port. This step is crucial for connecting the wires properly.

2.2 Preparing Wires from Phone Charger

If you don’t have a “crackhead cable,” you can repurpose an old phone charger. Cut off the top of the charger and identify the black and red wires. Trim off any excess material to expose the silver underneath. These wires will be used for connecting to the battery.

Connecting the Wires to the Battery

1. Prepare the Wires

Before connecting the wires to the battery, you need to prepare them properly. If you don’t have a “crackhead cable,” you can use an old broken Apple or Android cable. For an Android/USB-C cable, simply use the red and black wires. For the Apple cable, ignore the stringy/fiberglass stuff and use the red and metallic cables.

2. Connect the Black or Metallic Wire

Take the black or metallic wire from your chosen cable and connect it to the black solder node on the sensor. Ensure that the connection is secure and properly attached.

3. Connect the Red Wire to the Battery

Next, take the red wire from the cable and connect it to the red node on the battery. Again, make sure that the connection is secure and properly attached.

Once you have connected both wires to their respective nodes, double-check that everything is securely attached. This step is crucial to ensure a proper charging process for your Breeze Pro device.

Charging the Breeze Pro

Connecting the Wires

Once you have prepared the wires and battery, it’s time to connect them properly. Follow these steps:

1. Cut away a small amount of the orange electrical tape from the red port on the end of the battery.
2. If you don’t have a “crackhead cable,” you can use an old broken apple or android cable. For an android/USB-C cable, use the red and black wires. For an apple cable, ignore the stringy/fiberglass stuff and use the red and metallic cables.
3. Connect the black or metallic cable to the black solder node on the sensor, and the red wire to the red node on the battery.
4. Ensure that the black or metallic cable becomes warm, indicating that charging is in progress. If it becomes too hot to touch, stop charging until it cools down.

Charging Precautions

While charging your Breeze Pro, it’s essential to take certain precautions to ensure safety:

• Perform this process in a well-ventilated area away from flammable vapors.
• If you notice any swelling or release of fumes from the battery, stop charging immediately and dispose of the device properly.
• If you observe a small wisp of smoke coming from the ground, it’s likely just arcing and not a cause for concern. However, consider pausing charging momentarily.

Safety Tips

Here are some additional safety tips to keep in mind while charging your Breeze Pro: